Rajatape Maskeringsteip


39,00 kr – 59,00 kr inkl. mva
- Velegnet til merking, midlertidig forsegling/bunting og maskering.
- Etterlater ikke spor ved kortvarig bruk.
- Er vannfast og kleber til alle slags underlag.
«Maskeringstape fra Rajapack er allsidig og har mange bruksområder.
Praktisk: maskeringstapen kleber til alle slags underlag, er vannfast og tåler opptil +60˚C i inntil 30 minutter. Rives av for hånd.
Allsidig: Maskeringstapen er velegnet til merking av metall- og plastdeler, maskering før maling, overflatebeskyttelse eller til bunting av lettere gjenstander. Maskeringstapen etterlater ikke spor ved kortvarig bruk inntil 24 timer.
Tykkelse: 0,12 mmKlebeevne: 1,7 N/cm (gummibasert lim) Elastisitet: 8,5 %»
– Velg ønsket størrelse under – 19mm x 50m, 25mm x 50m, eller 50mm x 50m
Vekt | I/A |
---|---|
Dimensjoner | 10 × 10 × 8 cm |
Størrelse maskeringsteip | 19mm x 50m, 25mm x 50m, 50mm x 50m |
The Mr. Serious 18-pack bag holds enough cans for a big sized production.
• Non woven fabric.
• Strong 4cm handles.
• Fits 18 spray cans.
• Size: 43,5 × 26,5 x 22cm.
• 2 slide pockets in flap and 6 slide pockets for caps in bag.
Reason to use:
Holds enough cans for a big sized production, cans won’t tip over if cardboard boxes are used, bag is discrete in matt black, can be closed with zip, reusable.
AVAILABILITY: In stock
«Once the spraycan has been shaken and the paint mixed, many would like a more discreet can, without the sound of metal balls clashing. Montana Colors provides the solution with Mute, a neodymium-based magnet especially designed for this purpose. Place Mute under the can, and the magnetic effect of the magnet will block the mixing balls in place. Appreciate the silence, finally…»
Note:
It is recommended to keep the magnet away from credit cards and other electronic devices.
AVAILABILITY: In stock
This very powerful paint stripper can remove most markings made with aerosol paint or conventional paint. Its relatively fast action dissolves paint thoroughly on many surfaces such as walls, concrete, brick, stone, asphalt, metal, glass and wood. A slight discoloration may appear after cleaning.
MTN PRO Paint Stripper is effective on both smooth and porous materials. Be careful, however, not to use it on a vehicle because it would also indiscriminately remove its original paint.
The other function of this stripper is simply to prepare and clean a surface before painting it, for example to restore objects. The advantage of the aerosol can: to strip complex parts more easily than using a brush.
User manual:
• The surface to be cleaned must be dry, degreased and dust free.
• In the case of a painted surface, the unstripped areas must be protected
• Apply copiously the stripper and leave to act for fifteen minutes. If the paint is very encrusted, the action time should be extended up to 24 hours.
• Clean with a soft brush for smooth surfaces and a metal scraper for porous surfaces.
• Repeat the operation until the marking to be treated has completely disappeared.
• Wash thoroughly with water if the cleaned area is to be repainted.
Corrosive product, wearing protection (mask and gloves) is essential. Please refer to the safety instructions on the aerosol.
AVAILABILITY: Out of stock
«The GVS ELIPSE A2P3 with replacement filters, combines a particulate filter with an activated carbon filter to remove organic gases & vapours with a boiling point> 65°C and exposure of up to 5000 ml/m3 (see CE classes).
Typical applications would include timber spraying (preservatives and coatings), solvent and paint spraying, crop spraying, foundaries, road maintenance (bitumen laying).»
* Størrelse: M/L – Passer de fleste.
**Features & Benefits:
> Approved to European Standard EN140 : 1998, EN 405, EN14387 RD+A2 With P3 APF: 40. With Gas or Gas A2+P3: 20.
> Elipse twin filter ready to wear half mask
> Replacement filters available
> Latex and silicone free, lightweight TPE face piece that is comfortable to wear for long periods of time
> Low profile filters provide unobstructed field of vision
> Compatible with other PPE safety products including visors and welding helmets
Product code: SPR496
Description: Elipse A2P3 replaceable filters Respirator M/L
Materials of construction Mask Body: TPE (Thermo Plastic Elastomer)
Filter media HESPA (High Efficiency Synthetic Particulate Airfilter), High Activated Carbon
Pore size: (µm) 0,3
Dimension: 97 x 128 x 140mm
Weight (g) Mask + A2 P3 Filters: 358 g
Retention range: 99.95% (minimum efficiency)
Ref. standard EN140 : 1998, EN 405, EN14387 RD+A2
Temperature: -5°C +55°C
Notes: Half-mask for Protection against organic gases and vapours, dust, metal fumes, mists and micro-organisms, i.e. bacteria and viruses.
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
«The GVS ELIPSE A2P3 replacement filters, combines a particulate filter with an activated carbon filter to remove organic gases & vapours with a boiling point> 65°C and exposure of up to 5000 ml/m3 (see CE classes).
Typical applications would include timber spraying (preservatives and coatings), solvent and paint spraying, crop spraying, foundaries, road maintenance (bitumen laying).»
> Approved to European Standard EN140 : 1998, EN 405, EN14387 RD+A2 With P3 APF: 40. With Gas or Gas A2+P3: 20.
> Elipse twin filters
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock