GVS Elipse P3 Half Mask (S/M)


299,00 kr inkl. mva
«The ELIPSE P3 R carries the highest classification for a particulate filter. EN143 requires the efficiency to be at least 99.95%. The ELIPSE P3 R achieved 99.98% at 0.3 micron.
It is perfect for everyday use from DIY and commercial construction through to the more demanding environments of metalworking, welding and stonemasonry.
Replacement filters available.»
* Størrelse: S/M – Passer til barn og de fleste.
Features & Benefits>
> Approved to European Standard EN140: 1998. APF 20; BS EN143: 2000/A1 P3 (R D)
> Elipse twin filter ready to wear half mask
> Latex and silicone free, lightweight TPE face piece that is comfortable to wear for long periods of time
> Low profile filters provide unobstructed field of vision
> Compatible with other PPE safety products including visors and welding helmets
Product code: SPR501
Description: Elipse P3 replaceable filters ready to use; Respirator size M/L
Materials of construction: Mask Body: TPE (Thermo Plastic Elastomer)
Filter media HESPA (High Efficiency Synthetic Particulate Airfilter)
Pore size: (µm) 0,3
Dimension: 93 x 128 x 110mm
Weight (g) Mask + Filter: 132 g, Mask body: 97.6 g
Retention range: 99.95% (minimum efficiency)
Ref. standard EN140, EN143
Temperature: -5°C +55°C
Notes: Half-mask for protection from dust, metal fumes, oil and water mists and micro-organisms, i.e. bacteria and viruses
– Complete info and technical sheet HERE (.pdf)
3 på lager
Vekt | 0,3 kg |
---|---|
Dimensjoner | 10 × 10 × 14 cm |
The ELIPSE P3 R filters carry the highest classification for a particulate filter. EN143 requires the efficiency to be at least 99.95%. The ELIPSE P3 R achieved 99.98% at 0.3 micron.
It is perfect for everyday use from DIY and commercial construction through to the more demanding environments of metalworking, welding and stonemasonry.»
> Approved to European Standard EN140: 1998. APF 20; BS EN143: 2000/A1 P3 (R D)
> Elipse twin filters
> Product code: SPR316
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
«The GVS ELIPSE A1P3 with replacement filters, combines a particulate filter with an activated carbon filter to remove organic gases & vapours with a boiling point> 65°C and exposure of 1000 ml/m3 (see CE classes).
Typical applications would include timber spraying (preservatives and coatings), solvent and paint spraying, crop spraying, foundaries, road maintenance (bitumen laying).»
* Størrelse: M/L – Passer de fleste.
**Features & Benefits:
> Approved to European Standard EN140: 1998. With P3 APF: 20. With Gas or Gas+P3: 10.
> Elipse twin filter ready to wear half mask
> Replacement filters available
> Latex and silicone free, lightweight TPE face piece that is comfortable to wear for long periods of time
> Low profile filters provide unobstructed field of vision
> Compatible with other PPE safety products including visors and welding helmets
Product code: SPR503
Description: Elipse A1P3 replaceable filters Respirator M/L
Materials of construction Mask Body: TPE (Thermo Plastic Elastomer)
Filter media HESPA (High Efficiency Synthetic Particulate Airfilter), High Activated Carbon
Pore size: (µm) 0,3
Dimension: 97 x 128 x 140mm
Weight (g) Mask + A1 P3 Filters: 257.7 g, Mask body: 97.6 g, A1P3 Filters: 83.4 g each
Retention range: 99.95% (minimum efficiency)
Ref. standard EN140, EN14387+A1
Temperature: -5°C +55°C
Notes: Half-mask for Protection against most organic gases and vapours, dust, metal fumes, mists and micro-organisms, i.e. bacteria and viruses.
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
«Once the spraycan has been shaken and the paint mixed, many would like a more discreet can, without the sound of metal balls clashing. Montana Colors provides the solution with Mute, a neodymium-based magnet especially designed for this purpose. Place Mute under the can, and the magnetic effect of the magnet will block the mixing balls in place. Appreciate the silence, finally…»
Note:
It is recommended to keep the magnet away from credit cards and other electronic devices.
AVAILABILITY: In stock
MTN Pro – Multi-Purpose Vinyl Coating
«The vinyl coating is a matte, air drying paint that once dry, becomes a removable protective layer (peelable). Developed for the protection and customizing of objects. Weather-resistant. Can also give painted surfaces a grip-like tact due to its “soft touch” finish.»
Features:
– Easy to apply.
– Excellent removability (Peelable).
– Good covering capability.
– Good flexibility.
– Finish “Soft Touch”
– To paint on metals, plastics, glass and most 2K paints.
Instructions for use:
– Shake the aerosol well before using, approximately for one minute after hearing the sound of the mixer.
– Apply to clean, dry surfaces. We recommend cleaning the surface with a degreaser (alcohol, cleaning solvent, soap and water, etc.) or any other specific product that is suitable for the particular surface to be cleaned. Rinse with water and dry the surface.
– Apply 4-5 light layers to obtain the adequate thickness, while letting the paint dry between coats for approximately 5-10 minutes until a vinyl-like appearance is obtained.
– After about 12 hours, the vinyl layer may be removed as if it were adhesive film. By lifting an edge with your finger nail and peeling back the layer, all of the paint can be easily removed.
– After use, turn the aerosol can upside down and purge the valve. If the nozzle becomes clogged, replace it with a new one.
– Do not apply to connected electronic devices and use in well-ventilated areas.
– Product info news (.pdf)
– Safety data sheet (.pdf)
– Technical data sheet (.pdf)
AVAILABILITY: In stock
The ELIPSE P3 R filters carry the highest classification for a particulate filter. EN143 requires the efficiency to be at least 99.95%. The ELIPSE P3 R achieved 99.98% at 0.3 micron.
It is perfect for everyday use from DIY and commercial construction through to the more demanding environments of metalworking, welding and stonemasonry.»
> Approved to European Standard EN140: 1998. APF 20; BS EN143: 2000/A1 P3 (R D)
> Elipse twin filters
> Product code: SPR316
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
«The GVS ELIPSE A2P3 with replacement filters, combines a particulate filter with an activated carbon filter to remove organic gases & vapours with a boiling point> 65°C and exposure of up to 5000 ml/m3 (see CE classes).
Typical applications would include timber spraying (preservatives and coatings), solvent and paint spraying, crop spraying, foundaries, road maintenance (bitumen laying).»
* Størrelse: M/L – Passer de fleste.
**Features & Benefits:
> Approved to European Standard EN140 : 1998, EN 405, EN14387 RD+A2 With P3 APF: 40. With Gas or Gas A2+P3: 20.
> Elipse twin filter ready to wear half mask
> Replacement filters available
> Latex and silicone free, lightweight TPE face piece that is comfortable to wear for long periods of time
> Low profile filters provide unobstructed field of vision
> Compatible with other PPE safety products including visors and welding helmets
Product code: SPR496
Description: Elipse A2P3 replaceable filters Respirator M/L
Materials of construction Mask Body: TPE (Thermo Plastic Elastomer)
Filter media HESPA (High Efficiency Synthetic Particulate Airfilter), High Activated Carbon
Pore size: (µm) 0,3
Dimension: 97 x 128 x 140mm
Weight (g) Mask + A2 P3 Filters: 358 g
Retention range: 99.95% (minimum efficiency)
Ref. standard EN140 : 1998, EN 405, EN14387 RD+A2
Temperature: -5°C +55°C
Notes: Half-mask for Protection against organic gases and vapours, dust, metal fumes, mists and micro-organisms, i.e. bacteria and viruses.
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
«This unique product has the weight and feel of a real can, complete with rattling noise. Made of high grade aluminum with a rubber seal this can is the perfect place to hide your valuables in plain sight. From the outside, your first impression is that this is just a regular Hardcore spray can, but on the inside, instead of paint it has a hidden spacious compartment, to hide those things that are best left hidden from view. Made in Europe from an authentic spray can, The Pandora not only deceives you due to its appearance, but also because it makes the classic sound of a rattling can and weighs the same as a regular can. No matter how you handle The Pandora, it is absolutely impossible to notice its true nature. Provided empty.»
* Limited edition MTN Hardcore Stash Can
* Looks and feels like a real spray paint can
* Made in Europe from a real spray paint can
* Hidden air-tight compartment for stashing valuables
* Bottom is removable for stash spot
– Ta en titt i pdf filen
AVAILABILITY: In stock