Mr. Serious District 12 Shoulder Bag Camo


449,00 kr inkl. mva
• 600D all over printed ripstop polyester with waterproof backing.
• 4cm wide removable shoulder-strap.
• Main compartment can be closed with zipper.
• Slide pocket in flap can be closed with Velcro.
• There are 2 slide pockets for caps in side of bag.
Size: 31 × 26,50 x 22cm, 19 liter capacity.
Reason to use:
Holds 12 spray cans, can be closed with zipper and has hand carry straps.
3 på lager
Vekt | 0,9 kg |
---|---|
Dimensjoner | 20 × 20 × 5 cm |
• Mr. Serious Vection reporter bag is made of black 500D polyester with TPE waterproof backing.
• Main compartment can be closed with zipper and has stationery slide pockets inside.
• Laptop sleeve is padded.
• Size: 30x41x8cm, 9,8 liter capacity.
Reason to use: Fits 15 inch laptop or tablet in sleeve; slide pocket for magazine on back and has slim vertical design. Bag can be closed with zipper.
AVAILABILITY: In stock
Functional with boxy design.
Prime pack is made of 600D polyester with waterproof backing.
• Mobile device compartment for a maximum of 13 inch laptop.
• Main compartment has partition and 2 slide pockets inside
• Front pocket with flap is closed with zipper.
• Back-panel and shoulder-straps are padded. • Size: 28x37x14cm.
Bag is unisex with boxy design to carry your gear in a organized way. Bottom of main compartment fits 8 spray cans for those who care.
AVAILABILITY: In stock
Spray can backpack ready for action.
• 600D all over printed ripstop polyester with waterproof backing.
• Main compartment and front pocket can be closed with zipper.
• Shoulder-straps are padded.
• Big carry handle on top.
• Size: 30 x 40 x 21cm, 25,2 liter capacity.
Reason to use:
Holds 12 spray cans in carton boxes, and another 12 spray cans can be stacked on top.
Plus the front pocket fits 3 spray cans.
That’s 27 spray cans in one backpack!
AVAILABILITY: In stock
Mr. Serious 12 pack spray can bag is the bag for those who like to go out well organized and do a medium sized piece.
Specifications:
120g non woven fabric, strong 4cm handles, fits 12 spray cans (also 600ml cans), big slide pocket in flap and small slide pocket for caps in bag.
Size: 31×26,5x22cm.
Reason to use:
Holds enough cans for a medium size piece, cans won’t tip over, bag is discrete in matt black, can be closed with zip, reusable.
AVAILABILITY: In stock
A practical hip bag.
• 600D all over printed ripstop polyester with waterproof backing.
• 3cm wide high quality webbing.
• Hidden slide pocket on back panel.
• Key cord in mail compartment.
AVAILABILITY: In stock
«The ELIPSE P3 R carries the highest classification for a particulate filter. EN143 requires the efficiency to be at least 99.95%. The ELIPSE P3 R achieved 99.98% at 0.3 micron.
It is perfect for everyday use from DIY and commercial construction through to the more demanding environments of metalworking, welding and stonemasonry.
Replacement filters available.»
* Størrelse: S/M – Passer til barn og de fleste.
Features & Benefits>
> Approved to European Standard EN140: 1998. APF 20; BS EN143: 2000/A1 P3 (R D)
> Elipse twin filter ready to wear half mask
> Latex and silicone free, lightweight TPE face piece that is comfortable to wear for long periods of time
> Low profile filters provide unobstructed field of vision
> Compatible with other PPE safety products including visors and welding helmets
Product code: SPR501
Description: Elipse P3 replaceable filters ready to use; Respirator size M/L
Materials of construction: Mask Body: TPE (Thermo Plastic Elastomer)
Filter media HESPA (High Efficiency Synthetic Particulate Airfilter)
Pore size: (µm) 0,3
Dimension: 93 x 128 x 110mm
Weight (g) Mask + Filter: 132 g, Mask body: 97.6 g
Retention range: 99.95% (minimum efficiency)
Ref. standard EN140, EN143
Temperature: -5°C +55°C
Notes: Half-mask for protection from dust, metal fumes, oil and water mists and micro-organisms, i.e. bacteria and viruses
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
This very powerful paint stripper can remove most markings made with aerosol paint or conventional paint. Its relatively fast action dissolves paint thoroughly on many surfaces such as walls, concrete, brick, stone, asphalt, metal, glass and wood. A slight discoloration may appear after cleaning.
MTN PRO Paint Stripper is effective on both smooth and porous materials. Be careful, however, not to use it on a vehicle because it would also indiscriminately remove its original paint.
The other function of this stripper is simply to prepare and clean a surface before painting it, for example to restore objects. The advantage of the aerosol can: to strip complex parts more easily than using a brush.
User manual:
• The surface to be cleaned must be dry, degreased and dust free.
• In the case of a painted surface, the unstripped areas must be protected
• Apply copiously the stripper and leave to act for fifteen minutes. If the paint is very encrusted, the action time should be extended up to 24 hours.
• Clean with a soft brush for smooth surfaces and a metal scraper for porous surfaces.
• Repeat the operation until the marking to be treated has completely disappeared.
• Wash thoroughly with water if the cleaned area is to be repainted.
Corrosive product, wearing protection (mask and gloves) is essential. Please refer to the safety instructions on the aerosol.
AVAILABILITY: Out of stock
«The GVS ELIPSE A1P3 with replacement filters, combines a particulate filter with an activated carbon filter to remove organic gases & vapours with a boiling point> 65°C and exposure of 1000 ml/m3 (see CE classes).
Typical applications would include timber spraying (preservatives and coatings), solvent and paint spraying, crop spraying, foundaries, road maintenance (bitumen laying).»
* Størrelse: M/L – Passer de fleste.
**Features & Benefits:
> Approved to European Standard EN140: 1998. With P3 APF: 20. With Gas or Gas+P3: 10.
> Elipse twin filter ready to wear half mask
> Replacement filters available
> Latex and silicone free, lightweight TPE face piece that is comfortable to wear for long periods of time
> Low profile filters provide unobstructed field of vision
> Compatible with other PPE safety products including visors and welding helmets
Product code: SPR503
Description: Elipse A1P3 replaceable filters Respirator M/L
Materials of construction Mask Body: TPE (Thermo Plastic Elastomer)
Filter media HESPA (High Efficiency Synthetic Particulate Airfilter), High Activated Carbon
Pore size: (µm) 0,3
Dimension: 97 x 128 x 140mm
Weight (g) Mask + A1 P3 Filters: 257.7 g, Mask body: 97.6 g, A1P3 Filters: 83.4 g each
Retention range: 99.95% (minimum efficiency)
Ref. standard EN140, EN14387+A1
Temperature: -5°C +55°C
Notes: Half-mask for Protection against most organic gases and vapours, dust, metal fumes, mists and micro-organisms, i.e. bacteria and viruses.
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
The ELIPSE P3 R filters carry the highest classification for a particulate filter. EN143 requires the efficiency to be at least 99.95%. The ELIPSE P3 R achieved 99.98% at 0.3 micron.
It is perfect for everyday use from DIY and commercial construction through to the more demanding environments of metalworking, welding and stonemasonry.»
> Approved to European Standard EN140: 1998. APF 20; BS EN143: 2000/A1 P3 (R D)
> Elipse twin filters
> Product code: SPR316
– Complete info and technical sheet HERE (.pdf)
AVAILABILITY: In stock
2 stykker latex hansker fra Panthera – svart, pudderfri, ASTM testet, og dobbel polymer.
Mer info her i .pdf format
AVAILABILITY: In stock