* Høy trykk for stor areal dekning; 20 forskjellige farger – blank maling
* Tykk og pigmentfull maling som dekker veldig bra
* Praktisk størrelse når mann har litt mer dårlig tid
* Den originale spanske MTN høy kvalitets maling produkt. En Pink Fatcap inkludert i prisen
«Our traditional Mega (600 ml) has been reformulated with an improved opacity, a faster dry – perfect for incoming winter conditions, 6 new colors, and a fresh restyled design.
The potent firing of the new Mega Colors with its power in covering provides a fat line most efficiently made with the Pink Fat Cap. The new qualities of our Mega Colors offers different possibilities with the rest of our MTN caps, for example the long reach you can get from combining the new can with the Needle Cap.»
«Pack of 12 main color dual tip felt markers with a fine tip for drawing and a chisel tip for filling in color or doing calligraphy.
The colors are similar to a selection from the 94 spray paint color range and thanks to their translucent, alcohol-based ink, they may be combined in layers.
Try them out on the new MTN Books and be amazed.»
RV-1021 Light Yellow, RV-2004 Orange, RV-203 Oak Brown, RV-4010 Magenta, RV-3001 Vivid Red, RV-110 Yosemite Yellow (skulle være hvertfall), RV-182 Emerald Green (skulle være hvertfall), RV-34 Guacamole Green, RV-184 Rain Blue, RV-5005 Dark Blue, RV-173 Ultraviolet, og R-9011 Black.
This very powerful paint stripper can remove most markings made with aerosol paint or conventional paint. Its relatively fast action dissolves paint thoroughly on many surfaces such as walls, concrete, brick, stone, asphalt, metal, glass and wood. A slight discoloration may appear after cleaning.
MTN PRO Paint Stripper is effective on both smooth and porous materials. Be careful, however, not to use it on a vehicle because it would also indiscriminately remove its original paint.
The other function of this stripper is simply to prepare and clean a surface before painting it, for example to restore objects. The advantage of the aerosol can: to strip complex parts more easily than using a brush.
• The surface to be cleaned must be dry, degreased and dust free.
• In the case of a painted surface, the unstripped areas must be protected
• Apply copiously the stripper and leave to act for fifteen minutes. If the paint is very encrusted, the action time should be extended up to 24 hours.
• Clean with a soft brush for smooth surfaces and a metal scraper for porous surfaces.
• Repeat the operation until the marking to be treated has completely disappeared.
• Wash thoroughly with water if the cleaned area is to be repainted.
Corrosive product, wearing protection (mask and gloves) is essential. Please refer to the safety instructions on the aerosol.
Vi bruker informasjonskapsler for å sikre at vi gir deg den beste opplevelsen på vår hjemmeside. Hvis du fortsetter å bruke dette nettstedet, vil vi anta at du er fornøyd med det. PersonvernerklæringGodta