MTN Maximo 750ml sprayboks fra Montana Colors Spania.
Høy trykk, blank maling. Utmerket til maling av større arealer, og dekker veldig bra. Tilgjengelig i svart og krom. En formfett Pinkdot Fatcap følger med hver boks. Største størrelse sprayboks tilgjengelig på markedet.
«The vinyl coating is a matte, air drying paint that once dry, becomes a removable protective layer (peelable). Developed for the protection and customizing of objects. Weather-resistant. Can also give painted surfaces a grip-like tact due to its “soft touch” finish.»
– Easy to apply.
– Excellent removability (Peelable).
– Good covering capability.
– Good flexibility.
– Finish “Soft Touch”
– To paint on metals, plastics, glass and most 2K paints.
Instructions for use:
– Shake the aerosol well before using, approximately for one minute after hearing the sound of the mixer.
– Apply to clean, dry surfaces. We recommend cleaning the surface with a degreaser (alcohol, cleaning solvent, soap and water, etc.) or any other specific product that is suitable for the particular surface to be cleaned. Rinse with water and dry the surface.
– Apply 4-5 light layers to obtain the adequate thickness, while letting the paint dry between coats for approximately 5-10 minutes until a vinyl-like appearance is obtained.
– After about 12 hours, the vinyl layer may be removed as if it were adhesive film. By lifting an edge with your finger nail and peeling back the layer, all of the paint can be easily removed.
– After use, turn the aerosol can upside down and purge the valve. If the nozzle becomes clogged, replace it with a new one.
– Do not apply to connected electronic devices and use in well-ventilated areas.
This very powerful paint stripper can remove most markings made with aerosol paint or conventional paint. Its relatively fast action dissolves paint thoroughly on many surfaces such as walls, concrete, brick, stone, asphalt, metal, glass and wood. A slight discoloration may appear after cleaning.
MTN PRO Paint Stripper is effective on both smooth and porous materials. Be careful, however, not to use it on a vehicle because it would also indiscriminately remove its original paint.
The other function of this stripper is simply to prepare and clean a surface before painting it, for example to restore objects. The advantage of the aerosol can: to strip complex parts more easily than using a brush.
• The surface to be cleaned must be dry, degreased and dust free.
• In the case of a painted surface, the unstripped areas must be protected
• Apply copiously the stripper and leave to act for fifteen minutes. If the paint is very encrusted, the action time should be extended up to 24 hours.
• Clean with a soft brush for smooth surfaces and a metal scraper for porous surfaces.
• Repeat the operation until the marking to be treated has completely disappeared.
• Wash thoroughly with water if the cleaned area is to be repainted.
Corrosive product, wearing protection (mask and gloves) is essential. Please refer to the safety instructions on the aerosol.
The reposition-able glue MTN PRO allows to take off and re-stick the object from its support at leisure.
This aerosol adhesive has a formula based on acrylic micro-spheres which adhere like a Velcro. It is therefore possible to reposition the glued object many times before the fixing power begins to decrease.
Vi bruker informasjonskapsler for å sikre at vi gir deg den beste opplevelsen på vår hjemmeside. Hvis du fortsetter å bruke dette nettstedet, vil vi anta at du er fornøyd med det. PersonvernerklæringGodta