MTN Pro Contact Adhesive
149,00 kr inkl. mva
Contact glue in 400 ml aerosol. Non-toxic and quick-drying, it is composed of non-toxic organic solvents containing a polyurethane fixing agent for rapid, clean and definitive bonding on all substrates.
* Complete technical data sheet here: MTN PRO CONTACT ADHESIVE
9 på lager
• Immediate adhesion
• High adhesive power
• Does not damage materials
• Very fast drying
• Ease of application
Can be applied to bond surfaces such as fabric, leather, leatherette, wood, metal, porcelain, paper, cardboard, PVC, cork. Is used by double gluing, that is to say by applying glue both on the support and on the surface to be glued. Not recommended for polyethylene, polystyrene and polypropylene.
Recommended for the sectors: decoration, DIY, gardening, construction, industry and automotive.
• Thoroughly clean and de-grease the object to be painted. Remove corrosion with a wire brush and apply a coat of Antioxidant Primer or Plastic Primer if necessary on metal or plastic.
• Vigorously shake the container for about 1 minute until you hear the sound of the mixing balls.
• Spray on the 2 supports with the container in vertical position, by rapid and fine passages at a distance of 25 cm. Apply thin coats for best results.
• Leave each support to dry for approximately 5 minutes before bonding.
• When the operation is finished, turn the container upside down and spray for a few seconds in this position, until the paint stops coming out of the diffusor, thus preventing clogging.
Do not use on live equipment and apply in well ventilated areas.
Legal notice: dangerous, respect the precautions for use.
|Dimensjoner||6,5 × 6,5 × 20 cm|