MTN Pro Glitter Effect Varnish
129,00 kr inkl. mva
Water-based glitter varnish that dries quickly and is weatherproof. Gives a glistening and iridescent effect to many surfaces like iron, steel, plastic, wood and expanded polystyrene. Suitable for indoor use and in less ventilated spaces.
• Glossy finish.
• Fast drying.
• Does not yellow.
• Good adhesion on all types of surfaces.
• Easy to apply.
• Indoor / outdoor use.
For a glitter look in decoration and creative hobbies (do-it-yourself, objects, stencils, etc …), fine arts, graffiti and industry. Can be applied on a multitude of supports (wood, metal, stainless steel, plastic or directly on polystyrene).
• Thoroughly clean and de-grease the object to be painted. Remove corrosion with a wire brush and apply a coat of Antioxidant Primer if necessary. On plastics and polyesters, apply a coat of Plastic Primer. Because of the multitude of materials and the various conditions of application it is advisable to make a test beforehand on an invisible part for example.
• Vigorously shake the container for about 1 minute until you hear the sound of the mixing balls.
• Spray with the container in vertical position, by rapid and fine passages. Apply thin coats for best results; several thin coats of paint are better than one thick. 3 layers recommended.
• Leave each layer to dry for approximately 10 minutes.
• When the operation is finished, turn the container upside down and spray for a few seconds in this position, until the paint stops coming out of the diffusor, thus preventing clogging.
Do not use on live equipment and apply in well ventilated areas.
Legal notice: dangerous, respect the precautions for use.
Silver Glitter, Gold Glitter, Multi-Color Glitter