MTN Pro Marble Effect

129,00 kr inkl. mva

«Decorative paint composed of acrylic resins to give a marbled appearance to any type of surface. It can be applied to metal, most plastic surfaces, stone, ceramic, glass and other previously painted surfaces.
This paint is very opaque and spreads over the entire surface thanks to fine threads of colored lacquer, thus imitating the characteristic veins of marble.
Warning: this paint only allows you to create the veins of the marble, so you will have to paint on a surface previously painted in black or white depending on the shade of veins chosen.»

+ -

1. Features

• Fast drying.
• Good adhesion on most surfaces.
• Easy to apply and repaint.
• Resists U.V. rays.
• Solvent-based paint
• Compatible with MTN Hardcore, MTN 94 and MTN PRO primers / varnishes.

2. Applications

If required, please apply a specific primer coat depending on the surface to increase its adhesion. It is recommended to use this product indoors. Outdoors, it is advisable to apply a layer of protective varnish to obtain better resistance.
On non-porous surfaces please apply a primer coat or perform a test beforehand.

3. Instructions

• Apply to clean, dry surfaces. Please clean the surface with a degreaser or any other specific product suitable for the surface used. Remove corrosion with a wire brush and apply a coat of Antioxidant Primer if necessary. On plastics and polyesters, apply a coat of Plastic Primer. On PP, PE, PA, ceramic or glass surfaces, please apply an anchor coat or color paint that can be applied to these surfaces. For application over other paints, please consult the waiting time between each coat of these. Because of the multitude of materials and the various application conditions, it is advisable to carry out a test beforehand on an invisible part for example. On MTN Hardcore and 94 paints for example, please apply between 30 minutes and 2 hours later. On MTN PRO paint RAL paints, please apply between 15 and 30 minutes later. When the application of a varnish is required, please consult the waiting time between each coat of the product applied as a primer.
• Shake the container vigorously for about 1 minute until you hear the sound of the mixing balls.
• When the operation is finished, turn the container upside down and spray for a few seconds in this position, until the paint stops coming out of the diffuser, thus avoiding the obstruction.

Do not use on energized equipment and apply in well ventilated areas.
Consult the safety data sheet.

Legal notice: dangerous, respect the precautions for use.
* Technical data sheet : TDS Marble Effect
* Safety data sheet : MSDS Marble Effect

Vekt 0,5 kg
Dimensjoner 6,5 × 6,5 × 20 cm

Black Pattern, Gold Pattern, Silver Pattern, White Pattern

Produktnummer: I/A Kategori: Stikkord: ,

Min Handlekurv




🔎 Nylig Sett


Godt å se deg her!

Ett passord blir til-sendt deg per epost.

Dine personopplysninger brukes til å øke brukervennligheten på denne nettsiden, gi deg tilgang til administrasjon av din brukerkonto og andre formål som beskrevet i våre personvernregler.

Har du allerede en kundekonto?